WR - water repellent finishing
Due to the water repellent finishing, the fabric does not let water penetrate it protects a person from water coming into contact with the skin. The fabric is vapour permeable (it allows perspiration to come out), but it does not allow vapour in from outside.

OWR - oil-water repellent finishingv
The oil-water repellent finishing hinders the penetration of water and oils, without decreasing the vapour permeability of the material (allows perspiration to come out).

POWR – petroleum-oil-water repellent finishing
This finishing hinders the penetration of water, oils and oil products of heavy fraction without decreasing vapour permeability of the material (fabric allows perspiration to come out).

K-50 - acid protective finishing, resistant to a 50% solution of sulphuric acidv
Fabric with this finishing prevents acid from penetrating it and protects the wearer from acid touching the skin: drops of acid roll off the surface of the fabric or, if the fabric is in horizontal position, will not penetrate the fabric for 6 hours.

K-80 - acid protective finishing, resistant to a 80% solution of sulphuric acid
Fabric with this finishing prevents acid from penetrating it. Acid does not touch the skin: drops of acid roll off the surface of the fabric or, if the fabric is in horizontal position, will not penetrate the fabric for 1.5 hours.

LS - low-shrinkage finishing
Fabrics with low-shrinkage finishing, have a soft feel. This finishing provides minimum changes of fabric dimension in warp and weft after wet treatment.

WW - Wash and Wear finishing
Due to the Wash and Wear finishing fabric obtains excellent parameters:less creasing  when wet, nice silky feel, drape well. No ironing after washing.

  AntiDecay
Antidecay finishing (Sanitized technology) is recommended for clothing made for personnel working in conditions of increased humidity, including mine workers. The operating principle of the antidecay finishing implies destroying metabolic processes in the cell of undesirable microorganisms that cause formation of mold and fungi. Thus microorganisms’ ability to function, grow and reproduce is prevented. The finishing provides stable antifungal, bacteriostatic effect that provides protection from mold yeast, fungi and algae, gram-positive and gram-negative bacteria.

  Memrane coating
Membrane coating  guarantees waterproofness during a 24-hours rain, full protection from the wind.

  TO - fireproof finishing
Clothing made from this fabric: does not burn or melt near an open flame or when exposed to high temperatures, does not smoulder when surrounded by flames for 30 seconds, keeps its original shape after being exposed to flames.

  Climate coatings
Due to the Wash and Wear finishing fabric obtains excellent parameters:less creasing c when wet, nice silky feel, drape well. No ironing after washing.